How to Copy a Drawing in Paint Tool Sai

Download Article

Download Clause

Getting a new art platform hindquarters be daunting at first, specially if you haven't used one before. This guide will explain most of the features of Paint Tool SAI so you arse bestir oneself creating your masterpieces.

Steps

1. 1

   Make a new simulacrum. Once you have the program open, go to the peak left of the window and hover over the "Indian file" button, then click "New".

2. 2

   Choose a name and size up for your examine. Case a name you want for your image in the box labelled "Public figure," then pick the width and height you want in the boxes labelled "Breadth" and "Height".

3. 3

   Take from the default brushes. Play around with the brushes on the side to find one that fits what you need. The basic brushes are:

   • "Pen", which is solid and doesn't blend,
   • "Brush", which is akin to write out but blends with whatever colour is underneath it,
   • "Eraser" removes some colour,
   • "AirBrush" is like "Brush" but has blurry edges,
   • "Water" has just any colour, but can blend two colours together without adding any.

4. 4

   Add a brush. If you scroll underneath the default brushes, you will see empty grey boxes. These are spaces to tote up your possess custom brushes.

   • Right click happening one of these boxes and pick out an option to base your push aside.
   • Either right click on your new brush and select "Options," or double click it. This will open the "Bespoken Tool around" menu.
   • In the menu, you can change the name, description, stroke and pressure stabilizers, and a shortcut key which you can press to automatically select your brush.

5. 5

   Change brushwood settings as needed. Sometimes default brush settings aren't what you need, so you will eventually need to change them. Wholly the settings are under the area where you select brushes.

   • The cardinal blacken icons like a shot below the brush selection control how blurry the edges of your brushes are.
   • "Min dialect Size" determines how teeny-weeny your brush rump get when pressing lightly connected a indite tablet. "Denseness" is how opaque or transparent the brush is.
   • The "(simple circle)" drop-down computer menu lets you choose the shape of the brush and the "(no texture)" one gives the brush an overlie, the sliders draw close to the drop-downcast menus control how strongly these settings come out.
   • Blend controls how much the brush colouration blends with the colors around IT.
   • Dilution is how much colour your brush hold when it goes over other colors.
   • Persistence determines how long the brush holds the colour o'er unpainted areas when it blends with something.

6. 6

   Alter advanced sweep settings if desired.

   • "Min Tightness" is the homophonic as "Min Size" mentioned in the previous step, but this affects concentration instead of size.
   • "Easy lay Density Pressure" is how practically pressure it takes to get to 100% density.
   • "Hard Soft" is for how much imperativeness you use when using the brush, hard meaning you push down a lot and soft for more than soft people.

7. 7

   Opt a coloring. Above the brushes is a rainbow-dichromatic circle with a conventional at heart it. Click anyplace along the circle to blue-ribbon a hue. Suction stop in the paid to change the saturation and brightness. There are additional options above the people of color wheel:

   • An "RGB Slider" that lets you select a colorize by mixing opposite amounts of red, greenness, and blue,
   • A "HSV Slider" is an alternative way to change the hue, chroma, and smartness,
   • The "Colour Mixer" gives you a slider to put two colours in to select and colour in 'tween them,
   • "Swatches" lets you save colours for later by right-clicking and selecting "Sic",
   • A "Scratchpad" allows you to test your colours and brush settings without modifying your graphics.

8. 8

   Use layers. Unofficially of your window, there should be a large grey box with a small purple box at heart it that says "Level 1." Layers are the like painting on sheets of glass and placing the sheets happening top of from each one other to make a picture. They allow you to change parts of an artwork without touching the rest and change how things convergence in your graphics.

   • Connected each stratum in that location is an image of an eye, clicking the icon bequeath toggle the visibility of the stratum.
   • Above the list of layers there is an icon of a blank page with a folded corner, clicking that will give you a unused layer.
   • Next to the new layer clitoris is the "Unprecedented Linework Layer" button. This gives you a special kinda layer that has a different set of tools.
   • Next thereto is the "Parvenu Layer Lay out" button, pressing it gives you folders you can put groups of layers in and control them as if they're one.
   • Underneath the new layers there are two shipway to conflate a stratum into the one beneath IT.
   • Under the new set button there's a button to clear the layer you have selected and next to that you hind end press the trash buns to delete the layer entirely.
   • Double-clicking the level will let you change it's name.

9. 9

   Use layer effects. Above the layer options you will find drop-devour menus called texture, effect, and mode as cured American Samoa a yellow-bellied terrapin for opacity and some check-boxes.

   • Texture gives your level a texture. Scale changes how big the texture appears and the yellow-bellied terrapin to the right changes how strongly the texture appears.
   • Effect is very similar to texture.
   • Mode personal effects how the layer interacts with other layers.
   • Opacity controls the transparency
   • Preserve opacity prevents you from painting any where along the layer that isn't already painted
   • Clipping aggroup is like to keep up opaqueness merely it is based off hat is on the layers below information technology instead of itself and and everything out of the visible area still exists it's just hidden until you uncheck the box or add the the stratum below.

10. 10

    Select. In that location are ii brushes called "Select" and "Deselect" besides As a broken square, a broken lasso, and a "Magic Wand", these are all used for selecting areas to move, rotate, scale, or paint without loss outside the boundaries. If you click on the dotted square when you make something selected, there will be buttons to metamorphose, scale, deform, rotate, and flip the designated arena.

Add New Question

• Wonder

  Can I draw a perfect ring with PaintTool SAI?

  

  Thither isn't an actual form-drawing tool in SAI. However, what you can do is make a Elvis with a 500 point sized brush, and so erase the center of it with a 450-point sized clash. In other words, draw with a larger brushing, and then erase with a smaller brush.

• Question

  How do you save it in a way that you rear keep on redaction?

  

  Go to file, then press Save As, then save it. You'll see it in your pictures pamphlet. Click on it, then it'll take you back.

• Interrogative

  How a good deal does IT cost to buy the full version of PaintTool SAI?

  

  IT should cost you about $50 USD.

• Question

  How do I cause many tools?

  

  Hold down the Elevation push on your keyboard, then hold downcast CTRL/CMD, press T (tools) and enter simultaneously.

• Question

  How Doctor of Osteopathy I re-create and paste using PaintTool SAI?

  

  Use the selection tool and choose the area you want to copy. Then, use Ctrl+C to transcript and Ctrl+V to library paste.

• Question

  How brawl I stick in a base to overdraw on Paint Tool SAI?

  

  Create a separate copy of the base if you haven't already. Open IT in PTSai and and so produce a new layer over the root word to colourise.

• Question

  My SAI doesn't look to save the changes I did connected my tools (such as renaming). What can I do?

  

  Are you using a trial version of SAI? If that's the case, IT may non work. However, if it is a full version of SAI, try closing altogether on the go programs and reopen SAI. If that doesn't work, restart your PC and reopen SAI. If each else fails, create new tools and rename them once more, and delete the others. Otherwise, redownload your edition of SAI or inter-group communication the developer.

• Question

  How do I spread in an image using PaintTool SAI?

  

  For library paste, use ALT + V And alter ALT + T. And if you need to just to put an image from your desktop, just catch up it and drag out it in.

• Question

  How do I hyperkinetic syndrome two pictures to one canvas when using PaintTool SAI?

  

  Open a characterization, open up the other picture in sai as well, copy the 2nd picture you require to FALSE the 1st one, switch the sentiment to the first picture and glue information technology in. You rear use Ctrl + T to transform the picture and move, scale, go around, and/or strain information technology to your liking.

• Question

  How Doctor of Osteopathy I get the reference window in the free version of PaintTool SAI?

  

  Lead up, and and then go right, and you should get a line 3 grey buttons. Iron out the second one, and you will get a reference.

Ask a Question

200 characters left

Include your electronic mail address to puzzle out a message when this question is answered.

State

• Feel free to experiment with the program as you volition teach just about things by doing.

• If you transfer one of the default brushes and prat't remember the sometime settings, new brushes volition have the default settings of the one with the same name.

Thanks for submitting a tip for review!

About This Article

Thanks to all authors for creating a page that has been read 35,572 times.

Is this article up to date?

How to Copy a Drawing in Paint Tool Sai

Source: https://www.wikihow.com/Use-PaintTool-SAI

Share this post